Programmable Digital Control

- Designed for use with Steamist HC Series Steam Generators.

- Allows programming of steam room settings from up to 100' distance from generator.

- Idle setback feature of the Digital Command Center allows efficient tailoring of operation for off-peak hours.

- Each day of the week can be programmed individually.

- Programs maximum temperatures and energy-saving "idle" temperature.

- Digital Command Center can program two steam rooms with one generator (SRP required for second room).

Digital Commercial Control Package (DCCP)
Includes: Digital Command Center with 50' cable • 1 User Bypass Control with 50' cable • 1 Room Sensor with 50' cable • 1 Control Module attached to the generator with 12-volt power supply, two relays for aroma therapy pumps • 1 Steam Solenoid pre-assembled to the steam generator.

- Specifications & Pricing

Second Room Package (SRP)

For use with HC Steam Generators and Programmable Digital Control ONLY.

Includes: 2nd User Bypass Control with 50' cable • 2nd Room Sensor with 50' cable • 2nd Steam Solenoid pre-assembled to the steam generator.

- Specifications & Pricing

Digital Automatic Blowdown Valve (DC-ABD)

For use with HC Steam Generators and Programmable Digital Control ONLY.

This feature is recommended in hard water areas to prolong life expectancy and decrease costly repairs when attendant isn't available for maintenance on a daily basis. The Automatic Drain Valve Cycle begins with each programmed Off cycle in the Digital Command Center.

- Specifications & Pricing

Commercial Aroma Pump (HC-CAP)

For use with HC Steam Generators and Programmable Digital Control ONLY.

Includes: Pump for addition of Aromatherapy Oils to steam line, 120 volt. Comes with 6-foot, 1/4" suction and discharge hoses, one injection valve, one filter.

Eucalyptus Aromatherapy Oil, 2.5 gallon bottle (HC-EUV
Lavender Aromatherapy Oil, 2.5 gallon bottle (HC-LAV)

- Specifications & Pricing

"CP-1" Steam Bath Temperature Control Package: Standard

Steamist ST-200C "Rapid Response" solid state temperature control with temperature sensor is designed to closely regulate temperature to within a degree and a half fahrenheit of the desired setting in the steamroom. The 1/2" N.P.T. steam solenoid valve works automatically in conjunction with the thermostatic temperature control. The solenoid valve opens allowing steam to enter the room or closes when preset temperature is reached. At these levels, the comfort of bathers is secure and management can be assured that their investment is solid. In instances where a single HC steam generator is powering two rooms, an additional CP-1 Control Package is required

- Specifications & Pricing

Automatic Blow Down Assembly (Optional)

This feature is recommended in hard water areas to prolong life expectancy and decrease costly repairs when attendant isn't available for maintenance on a daily basis. The Automatic Blow Down Assembly works in conjunction with a 7 day, 24 Hour Programmable Time Clock to drain system.

- Specifications & Pricing

24" Stand

Allows easy access for maintenance and draining.

Product No.: 68005
For HC-9 to HC-18, 8 1/2" x 18" c 24"H

Product No.: 68008
For HC-24 to HC-72, 14" x 25 1/2" c 24"H

- Specifications & Pricing

ASME Code Blowdown Tank

Permits draining of hot boiler water into the tank for cooling before it is dumped into drainage system. Allows the HC blowdown system to comply with codes that prohibit the discharge of water exceeding 140°F.

- Specifications & Pricing

Auxiliary Manual Reset Pressure Cutoff

Now comes standard on all Steamist Commercial Generators to meet UL 834 and ASME CSD-1 standards. Many state and local codes require an auxiliary pressure cutoff device with manual reset.C-24 to HC-72, 14" x 25 1/2" c 24"H

- Specifications & Pricing