Consumers are spending more to put more power in their shower,
and steambaths are a big part of the trend. There is major
growth going on in the category, and Steamist is right there to
help you grow with it!
The Steamist InstaMist generators feature
pre-heat function, which provides a generous volume of steam in
under a minute. This new feature maintains an average water
temperature of 180°F
in the stainless steel reservoirs. When the steam
generator is activated, the pre-heated water inside the steam
generator quickly reaches the boiling point, allowing steam to
flow out in under a minute.
All Steamist steam generators with or without InstaMist are
factory assembled and tested. There are no additional Plumbing
or Electrical requirements needed in the field for generators
with the InstaMist feature. The installation instructions for
the plumber and the electrician are provided with the steam
generator and need to be followed.
InstaMist Model Generators cannot
be used with the Optional Auto Drain.
InstaMist Steam Bath Generator Model - SM-12-IM/15-IM
Dimensions:
20"L x 8.25"W x 18.5"H
Pricing
InstaMist Model Generators cannot be used with the
Optional Auto Drain.
InstaMist Steam Bath Generator Model - System-18-IM/24-IM/30-IM
Dual
systems utilize two steam generators - one master and one slave
unit. When using a TC-150 control, we recommend an optional
TC-125 control for operation outside the steamroom or the
Designer Series Package which incorporates an inside and outside
control for optimum convenience.
Dimensions:
2 Generators @
20"L x 8.25"W x 18.5"H
Pricing
InstaMist Model Generators cannot
be used with the Optional Auto Drain.
Steamist recommends that the
SM-11 or larger generators have a thermostatic control (TC-150,
TC-135, DSC-425, DSP Package)
Steam
Bath Products
